1 x High Quality Reverse Osmosis Water Filter With Pump
Get Beautiful Tasting, Incredibly High Quality Filtered Water, On Tap, 24/7
Easy Self-Installation Under Sink - No Plumber Required
Kit Includes Everything You Need
Free Help and Support
Black Friday Deal
£345.00INC VAT
Saving
£90.00 (-20%)
Our Usual Price
£435.00 INC VAT
In stock | Only
176
left at this price | Next Day Delivery
Free Delivery & Returns
Order before 3pm for same day dispatch todayOrder within for dispatch today
"Very impressive set up & water taste great. Had slight leak at first where pump joins main body of filter, issue solved in one brief phone call. All good. Would recommend."
Jackie Brown
UK Water Filters Promise
If you change your mind about your purchase, for any reason, within 90 days, you can return your product for a full and complete refund. PLUS we will pay for your return postage (UK)
All orders shipped same day before 3pm
Free Delivery & Free Returns
(We’ll even pay your postage!)
3 Year full parts warranty
What you get
SKU:RO-PMP
Product Description
Reverse Osmosis System Plus Remineraliser with a Pump
A small percentage of UK households don't have sufficient pressure to run a normal non-pumped Reverse Osmosis system.
Pressure is measured in BAR.
1 Bar is the force needed to raise water through pipes up to a height of 10 meters.
1 Bar pressure would fill a 1 litre jug in about 7 seconds (via standard 15mm pipes).
Non pumped RO machines need 3 Bar operating pressure - but this is playing it safe.
To have a Reverse Osmosis filter system you simply need to make sure you have a reasonably healthy flow rate (which is the same thing as reasonable pressure) in your property - or at least from the pipe you'll be taking the water supply from.
This is usually the same pipe that goes into your kitchen sink cold water tap. (Bear in mind that the pressure might be too low at the top of your house while it's OK in the kitchen).
You don't have to measure your BAR. Instead a simple way to measure your water pressure is to turn your kitchen cold water tap on full.
If the flow seems vigorous and you get small splashes while standing near the sink then you probably have good enough pressure. (If you're getting splashed standing a few feet away then that is high pressure!).
Think You Might Have Low Pressure?
Most property owners already have a sense of whether their pressure is low.
Reverse Osmosis filters need reasonable water pressure to work.
If you suspect you have low pressure then it is best to opt for a pumped RO system straight away.
This is becauseretro-fitting a small pump to a system that's already fitted is not as easy as you'd think.
Getting it right is quite complex - if you want to do it safely!
For example; you need to have a setup whereby the pump turns on/off at the correct times ie has the right types of switches.
It all needs to be properly wired up in a specific way or it can damage the RO filter - and could even cause a fire!)
It's not as simple as retro-fitting an aquarium type pump.
This is why any good water filter supplier would say that, basically, if you buy a non-pumped RO system and then realise you need a pump, it is better to simply remove it - hopefully negotiate a refund from your seller - and buy an RO already fitted with a pump.
For all other general info on Reverse Osmosis please check our standard non-pumped system information here
As you may already know, Reverse Osmosis filters are usually expensive. You can easily pay £400 plus.
However, even though our filters are of a higher quality than many on the market, we are offering them to you here at a Special Offer price of £345 - See Today's Special Offer at the top of the screen.
Why are These Cheaper than Others on the Market?
Well for a start some people are simply overcharging. They are using the classic sales approach that "if it's expensive it must be good".
Yes, Reverse Osmosis is good. But it doesn't need to be that expensive.
Plus we only sell on the internet. Unlike other retailers, we don't have to pay for expensive shop rents and rates. And we don't add unnecessary "stages" to our RO systems.
Replacing the Filters
Like all water filters, you will need to replace the filters on the system periodically to ensure maximum performance.
The five main filter cartridges need to be changed every six months (Cost £47).
We will send you a reminder every 6 months to change these filters.
Reverse Osmosis System Plus Remineraliser with a Pump
A small percentage of UK households don't have sufficient pressure to run a normal non-pumped Reverse Osmosis system.
Pressure is measured in BAR.
1 Bar is the force needed to raise water through pipes up to a height of 10 meters.
1 Bar pressure would fill a 1 litre jug in about 7 seconds (via standard 15mm pipes).
Non pumped RO machines need 3 Bar operating pressure - but this is playing it safe.
To have a Reverse Osmosis filter system you simply need to make sure you have a reasonably healthy flow rate (which is the same thing as reasonable pressure) in your property - or at least from the pipe you'll be taking the water supply from.
This is usually the same pipe that goes into your kitchen sink cold water tap. (Bear in mind that the pressure might be too low at the top of your house while it's OK in the kitchen).
You don't have to measure your BAR. Instead a simple way to measure your water pressure is to turn your kitchen cold water tap on full.
If the flow seems vigorous and you get small splashes while standing near the sink then you probably have good enough pressure. (If you're getting splashed standing a few feet away then that is high pressure!).
Think You Might Have Low Pressure?
Most property owners already have a sense of whether their pressure is low.
Reverse Osmosis filters need reasonable water pressure to work.
If you suspect you have low pressure then it is best to opt for a pumped RO system straight away.
This is becauseretro-fitting a small pump to a system that's already fitted is not as easy as you'd think.
Getting it right is quite complex - if you want to do it safely!
For example; you need to have a setup whereby the pump turns on/off at the correct times ie has the right types of switches.
It all needs to be properly wired up in a specific way or it can damage the RO filter - and could even cause a fire!)
It's not as simple as retro-fitting an aquarium type pump.
This is why any good water filter supplier would say that, basically, if you buy a non-pumped RO system and then realise you need a pump, it is better to simply remove it - hopefully negotiate a refund from your seller - and buy an RO already fitted with a pump.
For all other general info on Reverse Osmosis please check our standard non-pumped system information here
As you may already know, Reverse Osmosis filters are usually expensive. You can easily pay £400 plus.
However, even though our filters are of a higher quality than many on the market, we are offering them to you here at a Special Offer price of £345 - See Today's Special Offer at the top of the screen.
Why are These Cheaper than Others on the Market?
Well for a start some people are simply overcharging. They are using the classic sales approach that "if it's expensive it must be good".
Yes, Reverse Osmosis is good. But it doesn't need to be that expensive.
Plus we only sell on the internet. Unlike other retailers, we don't have to pay for expensive shop rents and rates. And we don't add unnecessary "stages" to our RO systems.
Replacing the Filters
Like all water filters, you will need to replace the filters on the system periodically to ensure maximum performance.
The five main filter cartridges need to be changed every six months (Cost £47).
We will send you a reminder every 6 months to change these filters.
Everything you need to install the system is supplied
Easy to install no plumber should be required
Full instructions included
Free Technical advice to assist with any problems
Capacity / Production Rate - Gallons Per Day (GPD) 50 Gals
Feed temp (Degrees C) 4 to 29
Weight 19kg
Dimensions
RO unit: 49.5cm High x 37.2cm wide x 19.5cm deep
Storage vessel is 40cm High x 27cm wide
The 12 Litre Tank / Storage Vessel (Freestanding, connected to RO unit by tube, can be placed several yards away - simply ask us for some extra tubing).
The unit should be fed by a water supply that is potable i.e. drinkable.
Please note that Reverse Osmosis is a complex process requiring reliable equipment performing under high pressure. Always know where your water main stopcock is located in the unlikely event of leaks.
The filter system doesn't have to be at a level below the tap and neither does the tank as long as it's not a gravity fed system.
This model will produce 50 GPD ie its "production rate" is 50 gallons per day.
(This assumes perfect conditions ie clean water at the right temperature and that incoming pressure is good).
But when considering how much water is produced by any Reverse Osmosis filter, the most important factor is the size of your RO tank.
This is because your system feeds the tank then stops when it's full.
Here's how it works: When you draw water from your RO you are taking water from the tank. As the tank empties the system refills it at the "production rate" (ie 50 GPD) up to the tank's capacity.
Now, in addition to this, you have to consider that the tank's size is based on the actual physical dimension and not the amount of water it contains.
You have to also take into account the internal bladder that holds the water inside of the tank.
For example, the bladder inside this unit's nominal 12 litre tank will actually hold between 5 to 9 litres of water. If you draw all the water out of the tank it will take anywhere from half an hour to 4 hours to fill up again - depending on incoming water pressure.
Therefore the amount of water this size produces is 5 to 9 litres per average of 2 hours - on a stop/start basis. (Note that you only have to wait for more water if you fully drain the tank in one go. In our experience this happens very rarely with normal domestic usage).
Other typical tank sizes and the actual water they hold are:
18L nominal tank size: Holds 12 to 15 Litres
40L nominal tank size: Holds 23 to 28 Litres
For High Flow / High Capacity Reverse Osmosis systems click here
The simplest way to check your water pressure is to turn your cold water tap in the kitchen on full. Stand a few feet away. If you are being splashed with at least a few droplets then your pressure should be high enough.
If this is not happening, your local water supplier should be able to tell you what your water pressure is and whether it is likely to drop below 40 psi at any time.
The Unit is NOT designed to filter HOT water. It should only filter water at ambient temperature. (Feed temp = 4 to 29 degrees C).
However please note that our Reverse Osmosis units are often used to supply filtered water to hot/boiling water taps and other systems where the temperature is changed. That is fine. But the system itself should not filter hot water.
What are the Materials Inside the Reverse Osmosis Tanks?
Some people are concerned about the materials the RO tanks are made from and how it might impact their purified water.
This is understandable:
Who wants to filter their water carefully only for it to be somehow polluted in the storage vessel while waiting to be used!
(Just to be clear: RO filtration is a highly effective but slow process. Rather than you waiting for the filter to produce enough water for you, the system purifies the water slowly and fills up the storage vessel / tank. When you turn on the RO drinking tap there's several litres of filtered water waiting for you. The system then refills the tank with whatever you took out).
Our RO tanks / storage vessels are made from highly durable steel. The water doesn't touch this - which is a good thing or the highly purified water could cause the metal to release chromium oxide into the water!
Instead, the water is stored inside an airtight rubber bladder / diaphragm.
This is made from "butyl rubber" which is lined with polypropylene - a commonly used food grade plastic (see "Hazard data" below).
All these materials are industry standard. We have never come across and other type of materials for Reverse Osmosis storage tanks - and, collectively, we've been in water filtration for over 50 years.
(Bear in mind that after leaving the tank the water is purified even further by the post filters).
Polypropylene Hazard Data:
No negative health effects and symptoms.
No negative physical and chemical effects.
No hazard for environment.
Sources: 1) ESIS - European Chemical Substances Information System. 2) Hazardous Substance Data Bank (HSDB) - U.S. National Library of Medicine, 2001-1
The five main filter cartridges need to be changed every six months (Cost £47.00).
We will send you a reminder every 6 months to change these filters.
6 Month Five Filter Pack Replacement Code: FRO-PMP
You can order a spare 6 month five filter pack here
The largest filter, the RO membrane has a life of approx 3 years (This depends on your local water quality) You'll know when a change is needed because of the obvious change in taste. We send you a reminder every three years.
... and our Money Back Guarantee should help reassure you that we are an honest firm who will give you a first class, long term service.
How to get help
Call our help line on 020 8761 6611 at any time during UK office hours ie 9 am to 6 pm
Or email us for a rapid response.
Our policy is always to get back to you within an hour - or one working day at most.
Returns
In addition to your 3 Year Warranty, if for any reason you change your mind about your purchase within 90 days of receiving the goods, you can return your product for a full and complete refund *
PLUS we will pay for your return postage(UK only)
*This applies to individuals/ consumers using the products in domestic settings. Businesses please see our terms and conditions
Delivery Times
Order before 3 pm on any working day and we guarantee your order will be sent out the same day (not on weekends)
(To be honest we often manage to send them even after 3pm. But we can't promise that).
All prices on the website include delivery charges and VAT except where stated otherwise.
Delivery Charges
Your Standard "Free Delivery Included" is Second Class
This usually takes between 3 to 5 working days ie does not count weekends or Bank Holidays
Pay Extra for First Class
You also have the option at checkout to pay extra for First Class.
This should result in next day working delivery to mainland UK.
BUT please note while 95% do arrive next day this is not guaranteed.
However arrival within two working days is almost certain.
You can see your delivery costs at the checkout stage before you buy.
The great majority keep coming back for years because they like our friendly, helpful service and great value prices.
Free Delivery & Returns
All Orders Shipped Same Day Before 3pm
3 Year Full Parts Warranty
“I have been dealing with UK water filters for 8 years and have never had any cause for complaint. My orders have always been dealt with promptly often with next day delivery. Advice with regard to installation of new products has been generously given and would recommend this company without reservation.”
Frank Woodhead
“I have used UK Water Filters for many years now and never had a bad experience. From ordering to delivery it takes just a few days. They always send a polite email to check we have received our filter. I wouldn't think of using another company.”
Sandra Hutchinson
"We are very happy with the service provided by UK Water Filters. They have given us good advice and prompt service. We will be reordering with them again and wouldn't consider ordering anywhere else."
Mary
"Bought an under sink water filter after reading the reviews. It was dead easy to install, no plumber required and works like a dream. Communication and after sales service is also excellent. HIGHLY RECOMMENDED."
Brian Nuttall
SIGN UP TO OUR NEWSLETTER
Receive 15% OFF on your first order.
Learn more about the latest and best water purifying solutions, plus get exclusive discounts and all the news relating to UK water.
RO unit: 49.5cm High x 37.2cm wide x 19.5cm deep
